Do you/will you make AR10 (AR-10 / lr308) rails?

Unfortunately, at this time we do not offer rails for the AR10 platform. However, we hope to eventually offer them down the road if there is enough interest in them! 

 

Check out other frequently asked questions below! 

 

Barrel Nut Questions

The first place to check if you can't find your barrel nut is the back of the handguard. It is usually pretty hard to see and easily blends in. Loosen the 2 allen bolts and tilt your handguard so the muzzle end is upwards. The barrel nut should slide out. 

If for some reason you still can't find your barrel nut after following the above steps, click the "Leave us a message" button and we will get you squared away. You can also email support at support@stngrusa.com. 

So the steel barrel nut is going to be stronger and can be torqued down to a higher value than the aluminum version. The steel will also last longer if you plan on torquing it down multiple times. 

The torque value for the steel is: 30-80ft/lbs while the torque range for the aluminum is: 30-60 ft/lbs

With that said, the steel (3.29 ounces) version is heavier than the aluminum (1.4 ounces). If you are going for a super lightweight build, then aluminum is your best bet. However, if you don't mind the extra weight and want the strongest option we carry, then steel is the way to go.  

Handguard Questions

So typically the tabs need to be removed with billet uppers because they are too wide for the handguard.

However, it is possible to save most of the tabs with some uppers. You still have to grind off part of the tab, however, if you remove some of the inside (instead of just taking them off all together) it will work. Basically you just need to slowly remove the inside of the tabs until they fit. Depending on your upper, this allows you to keep the tabs and allow the handguard to fit.

Yes! All of our rails will work with the Ruger AR 556 as well as any other Mil-spec direct impingement AR-15s. 

Right now we only offer our rails in anodized black. Sorry about that!

Unfortunately, bull barrels combined with their gas blocks are too wide to allow our handguards (1.35" inside diameter) to fit over and will not work. Sorry about that! 

The cut-out on the HWK rail comes back about 1.06". So the length of each rail up to where the cut-out begins would be found by subtracting 1.06" from the overall length. 

 

Unfortunately, at this time we do not offer rails for the AR10 platform. However, we hope to eventually offer them down the road if there is enough interest in them! 

Unfortunately, we aren't able to offer custom length handguards at this time. However, if there is a certain length you would like us to make, don't hesitate to let us know!

Our handguards have an inside diameter of 1.35". This allows cans like the Noveske Kx5 and slim KAK slim can to fit underneath them. If your suppressor has a similar diameter as the cans mentioned above, it will work. However, if it is wider then it will unfortunately not be compatible. 

 

We choose the projects we work on based off of popular demand. If you want us to make a suppressor friendly handguard, let us know. If there is enough interest, we will definitely consider it! 

Other

All of our handguards are proudly 100% made in the USA from US aluminum. (This was recently verified by the Better Business Bureau (BBB) as one of the steps to become an accredited business).

Is there really any other way to do it?

Here is a link to our shipping policies as well as those of UPS and USPS: https://www.stngrusa.com/pages/shipping-service-policies

Sign up for our newsletter

★Reviews

Let customers speak for us

1984 reviews
92%
(1826)
4%
(84)
2%
(34)
0%
(2)
2%
(38)
5/5

Awesome handguard!!

Hawk hand guard

Easy to install, no timing needed. Looks great on my AR. I will buying another. Quality materials

Fantastic product

The hand guard fits perfectly and was really easy to install and had a nice finish on it

Very nice looking item, smoothed edges, Magpul front sight fit well and the quick disconnect in t...

Very nice looking item, smoothed edges, Magpul front sight fit well and the quick disconnect in the back for the sling doesn't allow the sling loop to rotate more than +- approx 10 degrees, Nice not rotating 360 and getting the sling all twisted. The front quick disconnect hole however doesn't have that feature and is thinner and the quick disconnect flops in that hole in and out as there isn't much meat on that hole. It is just a hole, no cut aways for the ball bearings to sit in like the back one. Maybe get one of those top rail QD !!

Too easy

Install went smooth, fitment and performance where spot on, no problem